Cutting & Installing White Lines

• Turf Installation

Roll out turf from the center outward, ensuring blades bend in the same direction for a uniform appearance.

Trim edges with a knife and use PET joint tapes (20-30cm wide) under seams.

• Step 5: Seaming & Gluing

Apply two-component glue evenly on joint tapes.

Press turf edges onto tapes and hammer seams for adhesion. Avoid gluing turf to the sub-base.

• Cutting & Installing White Lines

Use a linear cutter to remove green turf for markings.

Replace with pre-cut white turf strips, securing them with joint tape and glue.