For non-infill sports turf, a practical density range is usually more valuable than excessive density. Depending on the application, a range of approximately 10,000–16,000 tufts/m² can be sufficient when combined with proper yarn, backing, and shockpad engineering.
For football and school sports fields, Vivaturf often uses a controlled density range of approximately 12,800–14,500 tufts/m². This range provides enough support while still allowing drainage, airflow, fiber movement, and elastic recovery.
The goal is not to create the highest possible density, but to create a balanced system.
6. More Important Technical Parameters to Review
Instead of focusing only on density, buyers should review the following performance indicators:
| Performance Item | Recommended Technical Reference |
|---|---|
| Tuft density | Typically 10,000–16,000 tufts/m² depending on application |
| Tuft pull-out force | ≥50 N for sports-grade systems |
| Wear resistance | ≥6,000 cycles under ASTM D3884 reference testing |
| UV aging resistance | ≥6,000 hours for high-quality outdoor systems |
| Shock absorption | 45%–70% depending on field type and standard |
| Sports-field shock absorption target | Often around 55%–61% |
| Vertical deformation | Commonly 5–8 mm for balanced sports use |
| Drainage rate | ≥100 mm/h for many outdoor sports-field applications |
| Backing peel strength | ≥32 N/5 cm as a high-performance reference |
| Hydrolysis aging performance | High strength retention after accelerated aging |
| Environmental safety | Low heavy metal migration, low TVOC, low odor |
These parameters tell a much more complete story than density alone.
Leave a Reply