Before opening the area to vehicle traffic, consider checking four areas.

1. Subgrade and base compaction

Verify the required compaction and structural properties according to the engineering design.

2. Grass-grid installation

Check that the reinforcement system is properly connected, level and fully supported.

3. Artificial turf installation

Inspect:

• Seams
• Perimeter fixing
• Fiber direction
• Backing
• Adhesive application
• Surface flatness

4. Load and deformation assessment

For a professional project, obtain the relevant engineering calculations, structural design documents and product test data rather than relying on a simple statement that the turf is “vehicle resistant.”

---

Maintenance Tips for Artificial Turf Parking Areas

If non-infill artificial turf is used in a vehicle-accessible area:

• Avoid keeping vehicles parked in exactly the same position for extended periods.
• Minimize unnecessary tire spinning and sharp stationary turns.
• Inspect areas showing tire tracks or localized flattening.
• Keep drainage channels clear.
• Remove oil and chemical spills promptly.
• Avoid driving onto the surface when the underlying foundation is visibly unstable or waterlogged.
• Inspect seams and perimeter edges periodically.
• Redistribute traffic where practical.

These measures can reduce localized wear and help preserve the appearance of the turf.